Polymer Products | Mallard Creek Polymers

Filter By Product Type

Filter By Chemistry

Emulsion Products

Rovene® 6114
50.5 - 52.5
1000 - 4000
-45
Rovene^® 6114 is a low glass transition temperature, acrylic polymer emulsion with improved oil & grease resistance. It is a very soft film forming vehicle that provides good gloss, excellent water and rub resistance, and non-skid properties for flexographic and gravure inks and overprint varnishes.

Rovene® 6592
55.0 - 57.0
500 max
-41
Rovene^® 6592 is a well-balanced, cross-functional low Tg acrylic adhesive base with excellent peel/loop tack and shear balance with moderate, but repeatable peel build over 24 hrs.

Rovene® 6590
60.0 - 62.0
2000 max
-41
Rovene® 6590 is a high solids, low Tg, APEOfree acrylic PSA designed for demanding construction and flooring adhesives with alkali water and plasticizer resistance.

Rovene® 6001
58.5 - 61.0
1200 max
-39
Rovene 6001 is a very soft, all acrylic emulsion polymer specifically designed for formulation of construction adhesives.

Rovene® 6005
55.0 - 57.0
100 - 600
-38
Rovene 6005 is a very soft acrylic, high molecular weight latex emulsion specifically designed for formulation of pressure sensitive permanent label adhesives.

Rovene® 6006
55.0 - 57.0
600 max
-38
Rovene® 6006 is an APEO free, soft acrylic and high molecular weight emulsion designed for formulation of pressure sensitive adhesive for tapes & labels adhesives.

Rovene® 6120
54.0 - 55.0
300 - 1700
-26
Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1.

Rovene® 6016
48.0 - 50.0
600 max
-20
Rovene® 6016 is a self crosslinking acrylic polymer providing a soft hand to frothed or saturated substrates.

Ecronova® RA 576 H
41.0 - 43.0
50 - 300
-10
Ecronova RA 576 H is a self-crosslinking pure acrylic emulsion that incorporates excellent block and alkaline resistance and extraordinary wet adhesion with minimal water absorption.

Rovene® 6015
48.0 - 50.0
600 max
-8
Rovene 6015 is a self crosslinking acrylic polymer providing a medium hand to frothed or saturated substrates.

Rovene® 6033
50.0 - 51.0
600 max
0
Rovene^® 6033 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Ecronova® RA 153
41.0 - 43.0
300 max
+1
Ecronova RA 153 is an acrylic emulsion that stands out due to its insulation against leaking nicotine and stains from the substrate.

Ecronova® RA 154
41.0 - 43.0
300 max
+4
Ecronova RA 154 is an acrylic emulsion that shows significant insulation properties against wood stains, especially on exotic wood.

Tykote® 6160
48.0 - 50.0
1000 max
+7
Tykote 6160 is a flexible acrylic emulsion designed to provide a good balance of Cobb resistance, OGR, and MVTR properties from coatings made with it.

Rovene® 6031
50.0 - 51.0
100 - 500
+10
Rovene 6031 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Rovene® 6027
50.0 - 51.0
600 max
+10
Rovene® 6027 is an all acrylic latex that may be
utilized in various applications such as trade
paints, concrete coatings, and other coatings
requiring exterior durability and low VOC.

Ecronova® 6631
40.0 - 43.0
300 max
+10
Ecronova® 6631 is a high quality acrylic polymer dispersions are designed for a wide array of specialty architectural and industrial coating applications, including interior and exterior building paints, durable wood coatings, concrete protection, and many other applications.

Rovene® 6023
46.0 - 48.0
400 max
+12
Rovene 6023 is an all acrylic emulsion suggested as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars.

Rovene® 403
45.5 - 47.5
200 max
+12
Rovene 403 is a low odor all acrylic emulsion that can be used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars.

Ecronova® RA 111
49.0 - 51.0
3600 - 8000
+15
Ecronova RA 111 is a pure acrylic emulsion that provides minimal whitening and good water resistance, especially in mosaic plaster.

Tykote® 6161
46.0 - 49.0
1000 - 5000
+20
Tykote® 6161 is an excellent film forming flexible acrylic emulsion designed for oil and grease resistance grease resistant barrier coatings

Rovene® 6035
46.0 - 49.0
5000 max
+20
Rovene® 6035 is a high quality acrylic polymer dispersions designed for a wide array of specialty architectural and industrial coating applications.

Ecronova® 6608
42.5 - 43.5
300 max
+23
Ecronova® 6608 is an ambient cure, pure acrylic emulsion that incorporates excellent block and alkaline resistance and extraordinary wet adhesion with minimal water absorption.

Ecronova® 6620
49.0 - 51.0
300 - 4000
+28
Ecronova® 6620 is an ambient cure acrylic polymer with excellent UV stablity that is is recommended for exterior paints and plasters with low dirt pick-up.

Rovene® 6014
45.0 - 46.0
200 max
+30
Rovene 6014 is a self-crosslinking acrylic polymer emulsion providing a stiff hand to frothed or saturated substrates.

Rovene® 6117
47.5 - 48.5
50 - 150
+30
Rovene 6117 is a clear drying, 100% acrylic, water resistant latex emulsion designed to provide protection for all types of concrete, cementitious and rigid surfaces.

Ecronova® RA 127
49.0 - 51.0
2000 - 8000
+35
Due to its high UV stability, Ecronova RA 127 is recommended for exterior paints and plasters with low dirt pick-up.

Ecronova® 6630
40.0 - 42.0
300 max
+57
Ecronova 6630 is an ambient cure all acrylic emulsion that provides good chemical and blocking resistance, high hardness and scratch resistance as well as good wetting of wooden substrates especially for furniture and industrial coatings.

Ecronova® RA 646 H
40.0 - 42.0
300 max
+59
Ecronova RA 646 H is a self-crosslinking acrylic emulsion that provides good chemical and blocking resistance, high hardness and scratch resistance as well as good wetting of wooden substrates especially for furniture and industrial coatings.

Ecronova® RA 644 H
40.0 - 42.0
300 max
+59
Ecronova® RA 644 H is an ambient cure, OH-functional emulsion that provides good chemical and blocking resistance, high hardness and scratch resistance.

Ecronova® RA 160+
54.0 - 56.0
600 min
Ecronova® RA 160+ is a pure acrylic emulsion that provides excellent stain blocking and barrier properties in paint formulations.

Ecronova® RA 180+
41.0 - 43.0
40 - 2000
Ecronova® RA 180+ is a pure acrylic emulsion that provides excellent stain blocking and barrier properties in paint formulations.

Rovene® 6013
48.0 - 50.0
1000 max
+95
Rovene 6013 is a very firm self crosslinking acrylic polymer. It is recommended for various textile, paper, and nonwoven applications requiring a very stiff hand with good wet strength and chemical resistance. Rovene 6013 also has good resistance to heat and light aging.

Rovene® 6032
50.0 - 51.0
600 max
+13
Rovene 6032 is an all acrylic latex designed for low VOC coatings. This latex has the ability to handle high filler loadings as well as applications that required bake-ability.

Rovene® 9410
49.0 - 51.5
200 - 600
-56
Rovene 9410 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives.

Rovene® 4423
49.5 - 52.0
800 max
-44
Rovene 4423 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label adhesives and flooring adhesives.

Rovene® 9423
49.0 - 51.5
400 max
-44
Rovene 9423 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive permanent adhesives

Rovene® 4044
49.5 - 52.0
800 max
-35
Rovene 4044 is an APEO free, very soft styrene-butadiene emulsion designed for formulation of construction adhesives.

Rovene® 4047
49.5 - 52.0
800 max
-35
Rovene® 4047 is an APEO-free very soft styrene-butadiene emulsion polymer designed for use in tapes, label and construction applications with excellent water resistance

BarrierPro® 4556
50.0 - 52.0
800 max
-35
BarrierPro® 4556 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film.

Rovene® 6105
49.5 - 52.0
300 max
-31
Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives.

Rovene® 6130
49.0 - 51.5
600 max
-29
Rovene 6130 is a very soft, self crosslinking, carboxylated styrene-butadiene emulsion specifically designed for formulation of masking and carton sealing tape adhesives.

Rovene® 4125
49.0 - 51.5
500 max
-27
Rovene 4125 is a styrene-butadiene emulsion polymer recommended for applications where a primer-sealer that provides adhesion between asphalt and other various surface treatments is needed.

Rovene® 4310
52.0 - 54.0
800 max
-26
Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives.

Rovene® 5010
52.0 - 54.0
800 max
-26
Rovene 5010 is a carboxylated styrenebutadiene emulsion that imparts an ultra soft hand, offers excellent water and solvent resistance when formulated with external crosslinking resins.

BarrierPro® 4553
52.0 - 54.0
175 - 800
-26
BarrierPro® 4553 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film.

Rovene® 5550
49.0 - 51.0
1000 max
-25
Rovene 5550 is a self crosslinking carboxylated styrene-butadiene emulsion that as a soft, resilient hand with outstanding strength properties. This binder is specially suited for various textile and coating applications.

Rovene® 4305
52.0 - 54.0
350 - 1200
-24
Rovene 4305 is a styrene-butadiene emulsion polymer recommended for non-woven and textile applications that require a soft yet strong backcoating

Rovene® 4176
49.0 - 51.5
400 max
-23
Rovene 4176 is a medium soft, carboxylated styrene-butadiene emulsion that can be used with a variety of fillers and additives to customize the desired application properties.

Rovene® 4150
50.0 - 52.5
500 max
-16
Rovene 4150 is a medium-firm, self-crosslinking, carboxylated styrene-butadiene emulsion. It can be formulated into a variety of applications including carpet and flooring mastics. as well as textile and nonwoven applications.

Rovene® 4402
52.0 - 54.0
800 max
-16
Rovene 4402 is a styrene-butadiene emulsion polymer that has a medium soft hand with outstanding strength properties.

Tylac® 4193
50.5 - 52.5
500 max
-15
Tylac 4193 is a strong, yet soft and flexible styrene-butadiene concrete modifier.

BarrierPro® 4555
50.0 - 52.0
1000 max
-12
BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures.

Rovene® 4100
49.0 - 51.0
600 max
-5
Rovene 4100 is a styrene-butadiene emulsion polymer recommended for use for boxboard coating, in some publication grade papers and in the adhesive industry.

Rovene® 4817
53.0 - 55.0
100 - 900
-4
Rovene 4817 is a carboxylated styrene-butadiene emulsion that has a medium hand with above average strength properties.

Rovene® 4009
53.0 - 55.0
100 - 900
-4
Rovene 4009 is a styrene-butadiene emulsion polymer recommended for applications in specialty paper coatings where water, grease and oil resistance is needed.

Rovene® 4602
50.5 - 52.5
900 max
-2
Rovene 4602 is a soft carboxylated styrene-butadiene emulsion with excellent strength properties. It is designed for use in wet end paper applications where superior heat stability in the final product is required.

Rovene® 5499
52.0 - 54.0
1000 max
0
Rovene 5499 is a film forming styrene-butadiene emulsion that was developed as an ink vehicle for thermoplastic polyolefin (TPO) based wall coverings. More specifically it can be formulated for metallic ink vehicles.

BarrierPro® 4550
49.0 - 51.0
900 max
+1
BarrierPro 4550 is a general purpose styrene-butadiene emulsion polymer of medium stiffness. It dries to form a flexible, tough film of high water resistance.

Tylac® 4190
50.5 - 52.5
500 max
+3
Tylac 4190 is a styrene-butadiene emulsion polymer recommended for use in concrete, mortars, grouts and cement mixtures.

Tylac® 4191
47.0 - 49.0
200 max
+3
Tylac 4191 is a surfactant stabilized styrene-butadiene emulsion polymer with excellent cement compatibility for concrete, decorative overlays, grout and mortars.

Rovene® 4076
49.0 - 51.5
200 - 1000
+4
Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required.

Rovene® 4002
49.0 - 51.5
400 - 1000
+4
Rovene 4002 is a medium-firm, carboxylated styrene-butadiene emulsion designed to have good freeze-thaw stability and low odor characteristics, when used in trade sales coatings.

BarrierPro® 4551
52.5 - 54.5
1000 max
+7
BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates.

BarrierPro® 4554
52.5 - 54.5
200 - 1200
+7
BarrierPro® 4554 is a carboxylated styrene-butadiene polymer for coatings and construction applications requiring excellent water resistance.

Tykote® 1004
51.0 - 53.0
200 - 1000
+12
Tykote 1004 is a low surfactant styrene-butadiene emulsion polymer designed as a base resin for functional coatings. Tykote 1004 can be used to compound functional coatings exhibiting superior water, water vapor, oil and grease repellency.

Rovene® 4180
54.5 - 55.5
200 - 1500
+12
Rovene 4180 is a low VOC styrene-butadiene emulsion polymer that provides the ability to compound at high solids and in multiple application areas

Tykote® 1014
51.0 - 53.0
200 - 1000
+12
Tykote® 1014 is a low surfactant containing copolymer which can be used to compound functional coatings exhibiting superior water, water vapor, oil and grease repellency.

Rovene® 4181
54.5 - 55.5
1500 max
+14
Rovene 4181 is a low VOC, styrene-butadiene emulsion that imparts good wet/dry tensile strength, has good adhesion to a wide variety of surfaces, and can accept high filler loadings.

Tykote® 1019
52.0 - 54.0
850 max
+14
Tykote 1019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent film strength properties. It is intended for use as a base polymer in the formulation of barrier coatings for paper and paperboard packaging.

Rovene® 4470
52.5 - 54.5
200 - 900
+16
Rovene 4470 is a styrene-butadiene emulsion polymer that provides good aging properties, water resistance, and adhesion to a wide variety of fibers.

Tykote® 1005
50.0 - 52.0
1000 max
+18
Tykote 1005 is a styrene-butadiene emulsion polymer designed for use in functional barrier coatings requiring excellent water resistance.

Tykote® 1015
51.0 - 52.0
200 - 1000
+18
Tykote® 1015 is designed as a base resin for functional coatings. Tykote® 1015 provides high strength and pigment compatibility.

Rovene® 4021
49.0 - 51.0
750 max
+22
Rovene 4021 is a self-crosslinking, carboxylated styrene-butadiene emulsion that has a firm hand with outstanding strength properties. This latex is especially suited for various nonwoven, textile and performance coating applications.

Rovene® 4201
49.0 - 51.0
750 max
+40
Rovene 4201 is a self-crosslinking, carboxylated styrene-butadiene emulsion that has a stiff or ‘boardy’ hand. This binder is recommended for durable nonwovens such as floor maintenance pads and roof shingle mats, both glass and organic.

Rovene® 4601
51.0 - 53.0
500 max
+42
Rovene 4601 is a styrene-butadiene polymer emulsion designed to perform in textile applications. It may be utilized as a blend component, but may also find utility in textile applications where a very stiff final product is desired.

Rovene® 4650
48.5 - 51.5
900 max
+48
Rovene® 4650 is a high glass transition temperature, non-formaldehyde emitting carboxylated styrene-butadiene latex recommended for applications where a very stiff (hard) binder is needed.

Rovene® 4301
49.0 - 51.0
750 max
+58
Rovene 4301 is a self-crosslinking, carboxylated styrene-butadiene emulsion that has a very stiff hand. This binder is especially recommended for durable nonwovens such as floor maintenance pads and roof shingle mats, both glass and organic.

Rovene® 4111
54.0 - 56.0
500 max
+69
Rovene 4111 is a high glass transition temperature styrene-butadiene emulsion designed to provide additional opacity in inks, specifically inks formulated with titanium dioxide.

Rovene® 4106
49.0 - 51.0
600 max
+69
Rovene 4106 is a carboxylated, styrene-butadiene emulsion that can be used to enhance gloss on coated printing papers and paperboard.

Rovene® 4813
50.0 - 54.0
50 - 350
-42
Rovene 4813 is a very soft, non-carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives.

Rovene® 4848
49.5 - 51.5
800 max
-38
Rovene 4848 is a very soft, non-carboxylated styrene-butadiene emulsion specifically designed for the use in a two part spray adhesive for open or closed cell foams and other contact and cold seal applications.

Rovene® 4220
52.0 - 54.0
200 - 800
-26
Rovene 4220 is a non-carboxylated styrene-butadiene emulsion recommended for use in formulations directed at contact or cold seal applications. Rovene 4220 can also be used in architectural adhesives including many types of flooring adhesives and special contact adhesives.

Rovene® 8305
54.0 - 56.0
500 max
-24
Rovene 8305 is a high gel content, non-carboxylated styrene- butadiene emulsion recommended for flooring adhesives.

Rovene® 4040
49.0 - 51.5
100 - 750
-3
Rovene 4040 is a non-carboxylated styrene-butadiene emulsion designed for use as a concrete modifier. It is used as a tile grout mastic modifier where it enhances adhesion.

Tylac® 4901
47.5 - 51.0
750 max
+6
Tylac 4901 is a self-stabilizing, multifunctional styrene-butadiene copolymer additive for down hole cementing applications.

Rovene® 4043
49.0 - 51.5
750 max
+6
Rovene 4043 is a non-carboxylated styrene-butadiene emulsion designed for use as a concrete modifier. It is used as a tile grout mastic modifier where it enhances adhesion. Rovene 4043 is APEO-free.

Tylac® 4195
46.5 - 49.0
300 max
+10
Tylac 4195 is a non-carboxylated styrenebutadiene emulsion designed for use as a concrete modifier.

Rovene® PU 2149
36.0 - 38.0
300 max
Rovene® PU 2149 is an aqueous dispersion based on a polyurethane - acrylic hybrid system, which is pyrrolidone and APEO free.

Rovene® PU 2172
34.0 - 36.0
500 max
Rovene® PU 2172 is a water based, aliphatic polyether / polyester PU dispersion which is pyrrolidone- and APEO-free.

Rovene® PU 2177
34.0 - 36.0
300 max
Rovene® PU 2177 is a water based aliphatic polyester PU dispersion, which is pyrrolidone and APEO-free.

Rovene® 6104
47.5 - 49.5
500 - 1200
-45
Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes.

Rovene® 6119
51.5 - 52.5
600 max
-24
Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance.

Rovene® 6103
47.0 - 49.0
500 - 2500
-16
Rovene 6103 is a styrene-acrylic resin supported emulsion can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes.

Rovene® 6020
48.5 - 49.5
1000 max
-12
Rovene 6020 is a soft, carboxylated stryene-acrylic copolymer emulsion with good water resistance and exhibit it good resistance to discoloration.

Ecronova® DA 194
56.0 - 58.0
600 - 4000
-7
Ecronova® DA 194 is a styrene-acrylic emulsion that provides weatherability and water resistance in flexible, hydraulic lime mortars, flexible cement insulation coatings, flexible roof coatings and crack bridging systems.

Rovene® 6124
50.0 - 51.0
200 - 1000
-4
Rovene® 6124 is a styrene-acrylic polymer that offers a balance of strength and flexibility with excellent water resistance.

Rovene® 6121
51.0 - 52.0
700 max
-3
Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance.

Rovene® 6007
51.0 - 52.0
700 max
-3
Rovene 6007 is a soft styrene-acrylic emulsion polymer for use as a pressure sensitive adhesive.

Ecronova® KDA 60
33.0 - 35.0
20 - 100
+8
Ecronova® KDA 60 is designed for solvent-free deep sealer applications as well as primers.

Ecronova® KDA 30
29.0 - 31.0
10 - 50
+9
Ecronova® KDA 30 is designed for solvent-free deep sealer applications as well as primers.

Ecronova® KDA 788
49.0 - 51.0
50 - 300
+9
Ecronova® KDA 788 is a styrene acrylic polymer designed for preservative free interior matte paints and silicate paints and plasters.

Ecronova® KDA 790
49.0 - 51.0
50 - 800
+9
Ecronova KDA 790 is suitable for low VOC interior paint and silicate exterior paints.

Rovene® 6133
49.5 - 50.5
600 max
+10
Rovene 6133 is a styrene-acrylic emulsion polymer designed to work in a variety of coatings applications including interior, exterior, clear or pigmented.

Tykote® 6152
45.0 - 47.0
400 - 1000
+20
Tykote 6152 is a hard film forming styrene-acrylic emulsion designed for oil and grease resistant barrier coatings. This product also provides excellent water and blocking resistance in barrier coating compounds.

Rovene® 6112
46.0 - 48.0
1500 max
+20
Rovene 6112 is a hard, film forming, low glycol and VOC vehicle with a moderately low glass transition temperature for flexographic and gravure inks and overprint varnishes.

Rovene® 6026
48.5 - 49.5
300 - 800
+20
Rovene 6026 is a styrene-acrylic emulsion polymer that can be formulated in multiple coating and paint applications.

Ecronova® KDA 618 eco
49.0 - 51.0
1000 - 5000
+22
Ecronova® KDA 618 eco is an APEO-free styrene- acrylic dispersion, which achieves excellent wet rub resistance and high hiding power due to its high pigment wetting properties.

Rovene® 6034
49.0 - 50.0
1500 - 4000
+23
Rovene 6034 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal.

Rovene® 6018
50.5 - 51.5
100 - 800
+27
Rovene 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives.

Ecronova® KS 447
49.0 - 51.0
1000 - 4000
+27
Ecronova® KS 447 is a styrene-acrylic emulsion that shows excellent adhesion on various metal substrates and very good corrosion protection results can be obtained.

Ecronova® 6607
50.0 - 52.0
800 - 3000
+33
Ecronova 6607 is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance.

Ecronova® KDA 1004 eco
50.0 - 52.0
800 - 3000
+34
Ecronova® KDA 1004 eco is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance

Rovene® 6017
44.0 - 46.0
100 max
+35
Rovene® 6017 is self-crossing linking styrene-acrylic emulsion polymer recommended for bonding nonwovens where a firm, durable binder is needed such as highloft webs, interlinings, and medical applications.

Rovene® 6065
50.0 - 52.0
500 max
+48
Rovene 6065 is a styrene-acrylic polymer that is a tough, durable nonwoven binder intended to provide improved stiffness and strength.

Rovene® 6066
49.0 - 51.0
400 max
+97
Rovene 6066 is a styrene-acrylic emulsion polymer specifically designed for formulation of binder systems for moldable and self supporting composites.

Rovene® 6106
49.5 - 51.5
300 max
+100
Rovene 6106 is a low viscosity but high solids letdown emulsion for paper and paper board substrates.

Rovene® 6106V
49.5 - 51.5
2000 max
+100
Rovene® 6106V is a high viscosity, high solids letdown emulsion for paper and paper board substrates.

Rovene® 6111
47.0 - 50.0
400 - 1200
+104
Rovene 6111 is a low glycol and low VOC styrene-acrylic resin supported emulsion. It is a general purpose, hard, non-film forming emulsion for flexographic and gravure inks and overprint varnishes.

Rovene® 6115
48.0 - 50.0
1000 max
+105
Rovene 6115 is a styrene-acrylic resin supported emulsion. Rovene 6115 is hard, non-film forming vehicle that is neutralized with sodium hydroxide for flexographic and gravure inks and overprint varnishes primarily for use on paper and paperboard substrates.

Rovene® 6202
30.0 - 32.0
800 max
+120
Rovene 6202 is a general use styrene-acrylic resin solution that is used as a grinding resin to produce pigment dispersions. The solution can also be used as an additive to modify certain properties of an ink or overprint varnish.

Rovene® 6201
98.0 - 99.0
+120
Rovene 6201 is an alkali soluble styrene-acrylic resin with a mid-range molecular weight for overprint varnishes, water based inks and pigment dispersions

Rovene® 6204
33.0 - 35.0
3000 max
+120
Rovene 6204 is a 34% solids solution version of Rovene 6201 styrene-acrylic resin neutralized with ammonia hydroxide. It can be used as a pigment dispersant resin and as a modifying additive in inks or overprint varnishes.

Rovene® 6090
44.0 - 46.0
300 max
+39
Rovene 6090 is a functionally modified, water-based vinyl acetate copolymer latex designed for use in release coatings.

Rovene® 6091
44.0 - 46.0
300 max
+39
Rovene 6091 is a functionally modified vinyl acetate copolymer latex recommended for use as a water-based release coating. As a water based release coating, Rovene 6091 is recommended for use with adhesives exhibiting a high degree of tack.

Ecrovin® LV 360eco
51.0 - 53.0
4000 - 9000
Ecrovin® LV 360 eco is a water-based vinyl acetate copolymer emulsion for use in multiple adhesive applications.

Rovene® 7004
55.0 - .0
2000 - 3000
-15
Rovene 7004 is a low Tg product that forms a soft and tacky film with good adhesive properties for broad applications even at low temperature. It shows good resistance against aging, light or alkali.

Rovene® 7001
55.0 - .0
1500 - 2500
0
Rovene 7001 forms a clear, glossy flexible film with good adhesive properties for broad applications. It shows good resistance against aging, light, or alkali.

Rovene® 7002
55.0 - .0
2500 - 3700
0
Rovene 7002 forms a clear, glossy flexible film with good adhesive properties for broad applications. It shows good resistance against aging, light, or alkali.

Rovene® 7005
65.0 - .0
300 - 1300
0
Rovene 7005 is a non-plasticized vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction application. Rovene 7005 is a general-purpose copolymer emulsion that can be used in adhesive applications but especially for the improvement of all kinds of mineral bound building materials.

Rovene® 7006
55.0 - .0
500 - 3500
+10
Rovene 7006 is a low odor and APEO free VAE emulsion designed for interior coating system without solvents and plasticizers.

Rovene® 7007
55.0 - .0
1500 - 2500
+14
Rovene 7007 provides a soft flexible film with good adhesion on the surface of many common plastic substrates; excellent base emulsion for floor-, wall- or ceiling adhesives' compatible with cement so it can be used to reinforce waterproofing capability of cementitious compounds.

Rovene® 7008
55.0 - .0
1500 - 2500
+20
Rovene 7008 forms a tough but still flexible film with the best adhesive properties for broad applications. The Rovene 7008 exhibits excellent mechanical stability, and shows good wet tack and fast setting speed, so it can be ideally applied by a variety of techniques, including roller blade, spray gun, or extrusion. It shows good resistance against aging, light or alkali.

Powder Products

Tylac® 7506
98.5
12
-13
Tylac 7506 is a soft vinyl-acetate ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This redispersible powder is especially recommended for blending with inorganic binders such as cement, gypsum, and hydrated lime, or as a sole binder for making construction adhesives and seals.

Tylac® 7505
99
12
-10
Tylac 7505 is a vinyl-acetate ethylene (VAE) copolymer powder that is readily dispersible in water and forms a stable emulsion. This flexible redispersible powder is especially recommended for blending with inorganic binders such as cement, gypsum, and hydrated lime, or as a sole binder for the manufacture of construction adhesives.

Tylac® 7507
98
12
0
Tylac 7507 is vinyl-acetate ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This redispersible powder is especially recommended for blending with inorganic binders such as cement, gypsum, and hydrated lime, or as a sole binder for the manufacture of construction adhesives.

Tylac® 7501
98.5
12
+15
Tylac 7501 is a redispersible VAE powder recommended for blending with inorganic binders such as cement, gypsum, and hydrated lime, or as a sole binder for the manufacture of construction adhesives.

Tylac® 7502
98
12
+15
Tylac 7502 is a redispersible VAE powder that improves adhesion, flexural strength, abrasion resistance and workability of modified compounds such as tile adhesives, repair mortars, troweling compounds, mineral plasters and gypsum based compounds.

Tylac® 7503
98
13
+15
Tylac 7503 is VAE powder that is readily dispersible in water and forms a stable emulsion. Tylac 7503 is high Tg polymer binder. Tylac 7503 contains a fine mineral filler as anti-blocking agent. It is free of solvents, plasticizers, and film-forming aids.

Tylac® 7504
98.5
11
+4
Tylac 7504 is a vinyl acetate/ethylene/vinyl ester terpolymer powder that is readily dispersible in water and forms a stable emulsion. This redispersible powder is recommended for blending with inorganic binders such as cement, gypsum, and hydrated lime, or as a sole binder for the manufacture of construction adhesives.